Home Exotic Energy Free Energy

Free Energy Generator – The Pinwheel Gravity Engine

21326
92

A gravity engine is a free energy generator that apparently harnesses the power of gravity and use it to make mechanical work.

Although they are very controversial, some say they made functional ones.

Pinwheels and Gravity

Pinwheels have been used for many things along history. One of the most interesting uses I’ve ever seen is making a pinwheel act as a free energy generator, powered by gravity.

The inventor of this (unknown) or some other free energy fan has posted an explanation of how the Pinwheel Free Energy Generator might work, on a Squidoo lens. Another website I found hosted the schematics that may help one build the generator. I compiled both and put them into this article.

I really don’t guarantee whether this free energy generator will work or not, but I’m eager to find anybody who tried it and their results. Gravity is one of the disputed possible sources of energy that, if harvested properly and if working, would change the way we see things – forever.

How the Pinwheel Gravity Engine Works

“As the weight ball in the lower cylinder descends, it forces the liquid out of the cylinder, through the Pelton wheel (turning the wheel and the generator), and into the upper cylinder. As the ball nears the bottom of the cylinder, the liquid weight of the mechanism is concentrated in the upper and right side cylinders, over-balancing the mechanism to rotate to the right when unlocked.

As the ball presses down on the unlocking mechanism of the gravitational engine, it also compresses the push bar spring. If the ball weighs 60,000 lbs, the energy in the spring can equal 59,999 lbs. Once the ball unlocks the mechanism, the spring bar pushes the lower cylinder out of the stop block. This push, along with the over-balance, causes the whole mechanism to rotate 90 degrees to where the right side cylinder becomes the lower cylinder, having now its ball begin its descent-producing electricity.

This process continues perpetually. An air venting pipe connects the cylinders that are opposite to each other so that as the liquid enters the top cylinder, the air it is displacing goes out the pipe and into the bottom cylinder, being assisted by the vacuum being created in the bottom cylinder by it’s ball descending.

This free energy generator can function because the laws of entropy prevent only singular mechanisms from performing perpetually because they need to use the energy they produce to recycle themselves. Being a compound mechanism, this generator does not. The energy is generated, gravity rotates it.”

If any of you tried this experiment and it did or did not work, please comment. Also, if you have an opinion after seeing the schematics presented below, say your thoughts.

pinwheel generator

(Visited 33,049 times, 1 visits today)

92 COMMENTS

  1. Sorry but this won’t work to any degree that would create enough power to be viable, assuming it would do more than make a small lightbulb flicker. You would lose too much energy turning the generator and even not hooked up to a generator it wouldn’t produce a steady rotation and would have internal friction. Even if you found a way to work around those limiting factors, how would it be free energy? You would need large models to produce enough electricity to power more than a lightbulb, which means power plants, which means you would still be paying for it just the same as you do now.

  2. Hello Daniel P Soster,
    Can you reply us your details by sending SMS of your email ID +8801756356664. There was a Video of a inventor. But it deleted from the server. If you have new Technology can send me sms to this number with email ID.

  3. I saw video one person did PIN wheel electricity by input 10 HP and output 100KW. But unfortunately that video is not available in any website now a days. If some one has that video please send us by email. Some one help will be highly appreciated for us.

  4. The laws of physics must be strictly adhered to to prevent economic instability. We’re we to go around producing “free stuff”, life as we know it would cease to exist.

      • The laws of physics 200 years ago clearly stated that time doesnt change as we see in time dilation… SOooo…. i guess time dilation as we take into account when launching satellites into orbit must be magic then or “”Absolute Rubbish””…lol… Cause so the “””Great Physics Laws Of 200 Years Ago Said””….lolol….. The laws of science 500 years ago clearly stated that the earth was flat…. So if you believe that the earth is round, i guess that must be “”Absolute Rubbish”” right?….. hehe .. cause the laws of science 500 years ago said so…..Hehehehe….. Ur Such a genious…..Hahaha…..

  5. The moment someone claims that WE WILL HAVE PERPETUAL ENERGY BY PERPETUAL MOTION I simply read the rest with a pinch of salt. That is because under the laws of physics Energy (Input) == Energy (output) under ideal circumstances and Energy (input) > Energy (Output) under practical circumstances which asper free energy machines Energy (input =0) < Energy (output) which is clearly impossible may what anyone says. Theoretically many things can be said and many designs can be drawn but in practical there cannot be one claim which says SEE I HAVE MADE A FREE ENERGY DEVICE. If that was to happen the person will get a special Nobel Prize Overnight.

    • Says someone who has probably never put his money where his mouth is. And also someone who actually believes science is absolutely correct in everything they claim and there’s nothing new to be learned. Not to mention that there’s absolutely ways to overcome certain so called “laws” in science, or a device may not actually be violating any of those laws at all once you truly understand how it works. As for perpetual motion devices and the never ending controversy…if a device runs for say 3 years before anything has to be done to it, I would call that a great invention. But there’s always too many armchair “experts” who shoot it down before it ever had a chance by calling it a perpetual motion scam that’s impossible. We are going to overcome the brainwashed sciences that stopped exploring and pushing the boundaries like their forebears long ago. That was back when they saw theories as theories that could be wrong or partially wrong and not chiseled in stone facts that could not be touched! Thank God we had real scientists who’s research gave us power generation in the first place because the people we have now would never be able to achieve it. They’re too concerned about peer criticism and getting papers published instead of testing ideas that might challenge the status quo! But we do still have people dedicated to learning and discovery. They will get the last laugh. Then the experts in their own mind only will claim that they knew it all along.

      • I will only say that all the best with your invention. I will be eagerly waiting for your invention to overturn the most fundamental laws of physics. Once you have done that and proven to the entire world that perpetual motion is possible I will stop calling myself a physics person and will never teach physics again. But before that kindly overcome the loss of energy due to inertia…. friction… traction…. air drag…. and a few more and then draw energy put of it without the system slowing down and without any type of energy input.
        By the way there were a group of people not so distant in past who believed in alchemy. Well the rest as they say is history.

        • I didn’t say that perpetual motion was possible. But I believe that overunity is going to be achieved and I’m glad we have people who aren’t afraid of going against the establishment and the teachers of physics who were taught one way, never questioned anything and now teach one way and ridicule anyone else who questions anything. Do you honestly believe that science is 100% correct about all of the “laws” of physics? Do you think we can never discovery a way to get more energy out than we put in under any circumstances? Are we stuck with burning something as fuel, solar, wind, and hydro? I do not believe that! Do you? I know that a better way will be found. Obviously not by you….but it will be found. It probably already has but was rejected by our wonderful patent office because they couldn’t understand how it works! Nevermind THAT it works!

          • You seriously want to tap infinite energy? Then stop looking at gravity and look towards zero point energy. That is infinitely available energy and it is everywhere. If you don’t want your self to be a part of a huge number of charlatans then try to go after zero point energy. Because that is real.
            As for laws of science specially physics are concerned the one good thing about science is it can change. I am ready to withdraw every word I said if I can be proven wrong. But as of now I am right. Physics is right . And perpetual motion is not possible. Simply because it is more of an engineering problem to create a lubricant that can make friction between moving parts zero. And as long as you don’t have such a lubricant perpetual motion will not be possible. So stop blaming or fighting me because I know and you too know that I am correct in saying what I said. So don’t argue for the sake of argument. Millions of people out there are making perpetual machines. Every now and then I see videos claiming perpetual machines. But nobody stands the eyes of scrutiny. Because the first thing to be made for perpetual machine is a infinitely non Viscous lubricant. And for that no machine will work … You need to delve into engineering chemistry.

            Your approach is not scientific. When I say scientific i am not asking you to study science. Rather a scientific approach is the one which eliminates possibilities and looks at every detail. Most of you working on this project and only making designs out of imagination without looking at the finer details.

            Just answer one thing. When you attach a simple 5v dynamo to that rotating structure of perpetual motion stuff what will happen? Have you done a thought experiment even?

            The dynamo will create electricity and the moment you draw it out you create back EMF due to lenz law. Now how do you over come lenz law?

            It’s easy to criticise anyone but check your facts and knowledge first. Claiming something without a prototype and an actual working one t that is like putting your nMe is the list of charlatans.

            I will not ask you to stop. Because you will simply not understand what I am saying unless you actually see and come across it .
            So best of luck to all those who are a part of this team. I hope you guys will soon figure out what I am trying to convey.

        • Don’t be ridiculous. https://uploads.disquscdn.com/images/f7cdb7cb59857a0a931b8f995ef476fd749487a315c2f473b837cb26a728a04e.png I work within the laws of physics and gravitation, things which you fail to understand how to apply accurately. This trolling is not conducive to learning new things nor is it helpful in sharing testable usable ideas. Do not wait for me. This is child’s play and what I am doing now will not be shared with you. I have over seventy methods that have designed, tested, built over a dozen and all have functioned as stated. Again, this is the totality of the function, not one sode of it as you have been lied to, fooled and lulled to sleep by theory and misconception and this is why you cannot do what I am doing…and ten year old children can. So..tell me..what is your issue Shabham? Are you too old, too foolish or too ignorant or just too stupid to understand how easy this is? And if so…why are you here, pretending to refute what we have used for tens of thousands of years here already? Seriously…are you an imbecile? Or a troll, or just another barrier towards sharing information through functions without the theories of Einstein, stolen from Henri Poincare, based in Doppler refraction..but you probably have no idea what I am talking about or who Thomas Galen Hieronymus is, Hendershot, Caldwell, Leedskalnin, Moray…Tesla I think you know…somehow I doubt you have heard of the rest of these people.

        • @disqus_jrFTL1uokX:disqus “…there were a group of people [in the] not so distant past who believed in alchemy…”

          Correction: In the not-so-distant past, there were groups and societies of Progressive Thinkers who called themselves Alchemists, and studied Chemistry. They learned about molecules, elements of hte periodic table, how matter could change states, or change from one element or substance into another. Water into air, or into ice. And most of all, they sought hte means by which they might create the element of gold from other elements. All of their research and their methods were highly scientific, and in order to keep their data and practices secret, they formed the mysterious society of Alchemists that they were known as.

          Now, these alcemists didn’t want their research and discoveries being discovered by opponents, or falling into the wrong hands. After all, they had had hands in various discoveries such as things like black powder. So, what they would do is write down their research and discoveries using symbolic allegory and riddles. Not only that, if someone could try to translate thier writings into layman’s terms, they’d have to realize that all their outlandish, mystical descriptions of things ( the more allegorical part ), weren’t taken literally. It was a sort of written language they had developed together to confuse the people who weren’t “in the know”. All they while, they were learning how to change the states of molecules using heat, cold, energy, and by introducing different elements together in different settings in order to see what types of matter THEY would create as well. It was science, not mysticism. The mysticism was just meant to hide what they discovered from unwanted eyes.

          • Ladies and gentlemen, I would like to inform the world that I have cracked a formula where mass can use the influence of gravity to produce perpetual turning energy. I am looking for funding or technical partners to commercialise the invention. If anyone is interested please contact me. Bernard Munikwa, Masvingo Zimbabwe, e-mail [email protected]

    • We are already moving. Putting energy into a moving system to gain momentum is insane.
      Perpetual motion is already happening, through the movement of our Universe, Galaxy, Solar system, Planet Molecules and atoms. 6 Phases of gyroscopic compression that is not stationary. Learning how to tap the inertia of momentum allows us to induce this into an electrical function. Our planet already does this. To ignore natural functions is insane. Eat your friggin salt dimwit.

      • The Nobel Prize? Developed over guilt, after seeing his name on an obituary when his brother passed, described as a warmonger? Listen fella, you evidently live in your false representation, gifted to you by television, however reality is somewhat different…
        You tell me…what one of these 400 scientists received the Nobel sell out award?
        How many examples do blind people need to see? How many?
        The Wang permanent magnet motor, the Ecklin-Brown motor-generator, Howard Johnson’s magnet motor, the ‘Carousel’ magnet motor, Robert Tracy’s magnet motor, Ben Teal’s electromagnetic motor, the Jines magnet motor, Stephen Kundel’s magnet motor, Charles Flynn’s magnet motor, the Steorn magnetic devices, George Soukup’s magnet motor, Dietmar Hohl’s magnet motor, simple permanent magnet motors, the Muammer Yildiz magnet motor patent, Don Kelly’s magnet motor patent, Mike Brady’s ‘Perendev’ Magnet Motor, magnetic shielding from Pasi Mäkilä, the twin rotor suggestion, the permanent magnet motor of Victor Diduck and the permanent magnet Miller/Colson motor.
        Moving Pulsed Systems: The Adams motor/generator, Tewari Paramahamsa’s ‘Reduced Reaction’ Generator, Lidmotor’s Low-voltage Rotor, the Phemax self-powered motor/generator, Raymond Kromrey’s No-drag Generator, Teruo Kawai’s COP=3.18 motor, James Hardy’s self-powered water-jet generator, the Mourier COP=10,000 motor/generator, the RotoVerter, power boosting through coil short circuiting, Raoul Hatem’s free-energy rotor system, Lawrence Tseung’s COP=3.3 Pulsed-Flywheel, Art Porter’s magnetic motor system, raising the efficiency of DC motors and Direct coupled motors.
        Motionless Pulsed Systems: Charles Flynn’s magnetic power enhancement system, Lawrence Tseung’s magnetic frame, The transformers of Thane Heins, Professor Markov’s transformers, A Lenz-Law-Free transformer, David Klingelhofer’s screened transformer, Clemente Figuera’s Motionless Generator, the Alexkor zero back EMF coils, the self-powered generators of Barbosa and Leal, the first Barbosa and Leal replication, free energy from Lorrie Machett, the Annis/Eberly Motionless Generator, the motionless generators of Heinrich Kunel, Valeri Ivanov’s motionless generator, the motionless generators of Kelichiro Asaoka, Stephan Leben’s self-powered electrical generator, Floyd Sweet’s VTA, the Pavel Imris optical amplifier, the Meyer-Mace Isotopic Generator, the Colman/Seddon-Gilliespie generator, Don Smith’s “Resonance Energy Methods”, the Chinese developer Ming Cao, A Russian developer’s self-powered system, ‘Salty Citrus’ Chinese developer, another Russian developer, Nikanor Giannopoulos’ dual Tesla Coil arrangement, making a solid state Tesla Coil, the screened transformer of Joseph Boyd, the ‘Gegene’ magnetic plate power amplification, Tariel Kapanadze’s self-powered generators, the cold electricity coil of ‘UFOpolitics’, Stan Meyer’s electrical Particle Generator, the E-stress power generation system and the Ramaswami power transformer.
        Gravitational Pulsed Systems: Lawrence Tseung’s pulsed wheel, Lawrence Tseung’s Impact gravity wheel, Chas Campbell’s pulsed flywheel, The Self-powered Generator of José Luis García del Castillo, the Wilson self-powered DC generator, John Bedini’s pulsed flywheel, James Hardy’s water-jet generator, the Donnie Watts self-powered generator, the Magnetic Pendulum, Jerzy Zbikowski’s Chain Drive, Gravitational Effects, Mikhail Dmitriev’s gravity wheel, the Dale Simpson gravity wheel suggestion, the Veljko Milkovic pendulum/lever system, Amr Al-Hossary’s gravity wheel, the Murilo Luciano gravity chain, The ‘Hidro’ buoyancy generator, the Renato Ribera buoyancy patent, the 30-kilowatt gravity motor, the Baskara gravity wheel and the torque generator of William F. Skinner.
        Energy-Tapping Pulsed Systems: Frank Prentice’s electrical power accumulator, Dave Lawton’s cold electricity water-splitter cell, John Bedini’s pulsed battery charger, the Tesla Switch, the 3-battery switch, Carlos Benitez’s self-powered 2 kW generator, Bozidar Lisac’s Power-Boosting System, Don Smith’s devices, Tariel Kapanadze’s generators, Walter Ford’s high-power crystal set, Lawrence Tseung’s toroids, advanced Joule Thief circuits, The Joule Thief lights of ‘LaserSaber’, the Ed Gray power tube, Radiant Energy waves, Nikola Tesla’s experiments, the Alberto Molina-Martinez generator, Alfred Hubbard’s device, Joseph Cater’s Hubbard design, Floyd Sweet’s VTA, Rosemary Ainslie’s COP=17 heater design, Joseph H. Cater’s insights and Dr Oleg Gritskevitch’s 1.5 MW generator.
        Battery-Charging Pulsed Systems: John Bedini’s pulsed system, Roger Andrews’ switching system, Ronald Knight’s battery information, Ron Pugh’s battery charger build, Ossie Callanan’s free-energy system, a self-charging battery pulser, the modified fan battery charger, the relay coil pulse charger, the self-charging motor, the Alexkor battery chargers, Howerd Halay’s battery conditioning technique, the Tesla Switch, the self-charging motor, the ‘UFOpolitics’ motor, the 3-kilowatt Earth Battery, a battery charger for just one battery and Rene’s variation on the Joule Thief.
        Aerial Systems and Electrostatic Generators: Nikola Tesla’s aerial system, Jes Ascanius’ version of Nikola Tesla’s aerial system, Thomas Henry Moray’s aerial, Hermann Plauson’s systems, Roy Meyer’s device, Raymond Phillips’ RF to DC aerial system, the ‘Alexkor’ aerial system, Dragan Kljajic’s printed circuit, the TREC aerial , Harold Deyo’s patent application, the harmonic energy exchange device, Charles Goldie’s Electrostatic Generator, D. Le May’s Electrostatic Generator and Onezime Breaux’s Electrostatic Generator.
        Fuel-less Engines: The energy in air, Bob Teal’s compressed air engine, Scott Robertson’s thoughts on putting low-pressure air into a tank of high-pressure air, the Leroy Rogers compressed-air vehicle engine adaption, the Vortex Tube, the Eber Van Valkinberg compressed fluids engine, the Clem engine, the Josef Papp engine, the Robert Britt engine, the Michael Eskeli turbines, the James Hardy water-jet generator and the Cahill / Scott heat pump system.

        Passive Systems: Hans Coler’s devices, Thomas Trawoeger’s pyramid, the discoveries of Antoine Bovis, James Brock’s experiments, Peter Grandic’s patent, Les Brown’s pyramid information, Joseph Cater’s explanation of how all pyramids work, Pier Ighina’s passive energy devices, the Joe Cell, Bill Williams’ design and recent analytical advances, the Italian B.A.C. coil, co-ax cable electrets and the devices of Mr Keshe.

        Vehicle Systems: The HydroStar and HydroGen designs, running an engine on water alone, HHO Boosters, electrolyser design, the Smack’s Booster, the Hotsabi Booster, the Zach West electrolyser, the ‘Hogg’ electrolyser from Selwyn Harris, the AVA Magnetic Levitation electrolyser, Bob Boyce’s high-efficiency electrolyser, Pulsed Water Splitters, Dave Lawton’s replication of Stan Meyer’s Water Fuel Cell water-splitter, Stan Meyer’s style of construction, Dave Lawton’s circuits and construction details, pipe-tuning details, Dave Lawton’s auto-tune circuit, Dr Scott Cramton’s low-power water-splitting, modifying generators to run on HHO alone, David Quirey’s system for running unmodified generators on HHO, Stan Meyer’s water injection system, Peter Lindemann’s lawnmower running on water alone, Peter Lowrie’s high-current HHO system, mpg improvement through cam timing, the Firestorm spark plug from Robert Krupa, plasma ignition, Ted Ewert’s Vortex air-feed system, Water Vapour Injection systems, the Ram Implosion Wing, Fuelsavers streamlining, high mpg carburettors, Allen Caggiano’s carburettor, Vortex fuel reformers, the weird nature of water, Advanced Electrolysis, the Charles Garrett electrolyser, the Archie Blue electrolyserNikola Tesla’s power from ionised air system, Dr. Harold Apsden’s Electrical Power Generating Apparatus patent, Our Energy Future, Paulo and Alexandra Correa’s conversion of Longitudinal Electromagnetic Waves to ordinary electricity, Prof. Constantin Meyl’s scalar wave information, Nikola Tesla’s MHD drive, the nature of gravity by Maurice Cotterell, construction details for Dave Lawton’s gravity wave detector, the Butch Lafonte motor/generator, the Joseph Newman motor, Daniel Cook’s motionless generator, Michael Eskeli’s work-free heater design, Cold fusion, Karl Schapeller’s Device, Condensation-induced water hammer, William Hyde’s COP=10 electrostatic power generator, the suppression of knowledge, Bob Beck’s medical pulser and Joseph Caters work.

        Oh, and I have posted 3 systems. So get on it.

        • Let me start with the perpetual motion of celestial objects of universe that you are talking about.
          Do you know why earth keeps moving around sun without stopping? Because there is hardly any opposing force to stop it. No air drag…. No fluid viscosity…. No structural inertia to overcome… No surface friction …. And finally no energy to be extracted. But even this seemingly perpetual motion will end one day because earth loses energy through gravitational waves and through its collisions with interstellar particles but this time will run into trillion of years.

          Now let us come back to the situation on earth. Any mechanism… Absolutely any mechanism…. Has to overcome opposing forces. Inertia to start with…. Friction and Viscous or fluid drag. Even if you somehow overcome inertia and start your system without losing energy how do you plan to overcome friction. Yiu can minimise it but not make it zero. If you have mechanical parts in contact then you first need to work on a lubricant that can make the friction between them zero. Then and only then can you think of making the motion perpetual.

          But wait there is still one huge problem to overcome. Even if you achieve perpetual motion you will not be able to do any useful stuff with it. Do you know why? Because the moment you start drawing energy out of it the motion will come to a stop. The reason is straightforward since you are no giving any energy input hence perpetual motion will follow a delicate balance of input energy being equal to zero output energy. But energy withdrawal will mean output energy will not be zero anymore and soon the system will halt.

          How do you overcome that?

          This is very similar to superconductivity. The moment you start withdrawing energy the perpetual like motion of electrons tend to stop.

          Buddy if you are really interested to tap infinite energy without any input then I will suggest you go after ZERO POINT ENERGY. Find a way to tap it. It is real energy and the entire universe is filled with it. Leave gravitation and look towards zero point energy.

          Rest is up to you. I have seen hell lot of videos on various platforms claiming perpetual motion and energy and there is only one thing in common among them. They all are hoaxes and don’t work at all. Now you want your name to be a part of thar seemingly large number of charlatans or want to do seriously something unique is up to you.

          • You are absolutely incorrect. Falling water can be used to tap gravitation as easily as anything, however I have developed systems that allow us to tap gravitation without using water as a conduit Again, you are superimposing foolery, theoretical evaluations over observed functions. The absurdity that you speak of is the attempt to put yet more foorce into moving something that is already moving and thinking that you need to “overcome ” inertia rather than simply use this through gravitation. Gravity is an electrostatic surface function, as seen in water when the light wave is refracted by this electromagnetic wave. Again, following theory is illogical when I am showing how to use this now and many engineers, PhD’s medical doctors are beginning to learn how to apply this now using scalar interferometry, past the limitations imposed by people who followed Einstein into his grave. Perhaps it is time that you learned how easy this is to do on your own, and leave us that are doing it to teach those who are ready to learn how to induce the electrogravitational functions of mass in motion, our true potential. It is easier than you think Shubham…if that is indeed your real name fella. https://uploads.disquscdn.com/images/7217f15b18c4cd27b874a2c27a19921f783f598d8a1d0b5722f65f92331cdeb3.png

    • Not even close. Alfred Nobel was a weapons manufacturer so this was a guilt maneuver. Fuck his prize.
      I made several already and there are more coming, bigger, better and these are being applied into horticultural production that you have absolutely no part of…so this is not going to be shared with assholes who watch football, but the premium horticultural experts in the world,so that they can work with me and my company and solve famine first, and apply these functions where they need to be applied, into medicine and organic farming, through Vancouver Island Ormus and several other companies that I own and several more that I will be forming shortly to help guard, guide and guild these interests. You see, I care not what those of you who spend your time watching football on television do here…I care not that you waste your lives drinking beer out of aluminum cans, deteriorating your brain function while blaming others for the worlds problems, while ignoring those of us that can, will and are applying these solutions now. Most of you will not be able to understand me here, based on your diets alone. Some of you that maintain higher mineralization will gain interest and feel attracted to these ideas, these truths, but many of you will simply feel offended and use this emotional barrier to do nothing real here at all. That’s why I do not care for pretenders, or followers, those posting copy and past theories attempting to sound intelligent by copying ignorance in a thoughtful manner…
      It simply does not work like that here.
      Einstein could not even explain his pown theory.This is because it was not his.
      Had he understood what Tesla attempted to explain to him, he could have understood that the induced reaction of two opposing magnetic functions will be a square of force reaction, as these fields will invert and attract with the acceleration of a square of force reaction. This is electricity, not energy, as ebergy is also based on the magnetic back emf of any electrical function. It is odd that we ignore this, when power meters read this and cannot actually read electricity, but the magnetic flux associated with this moving field, through another. Gravity. In order to understand this, we mist start making magnets, breaking them and inducing polar functions through a diaphragm as a capacitor and gain attraction through imbalanced fields, just like when we rub a balloon on our heads and stick it to a wall. The same can be done with a lever, with a wheel on the other side with a weight on it. If I was given a Nobel prize, I would return it, as this is the biggest hypocrisy of them all, save for religion and currency.
      Test functions, test theories, and solve the equation of why you are here. This was the easy part…where we go using this understanding has a cautionary tale attached. https://uploads.disquscdn.com/images/7217f15b18c4cd27b874a2c27a19921f783f598d8a1d0b5722f65f92331cdeb3.png

  6. What if it was a U-shaped tube that used the pressure created by gravity alone? Is it possible, or has it even been accomplished, to have a free floating structure in the ocean, below the turbulent surface, that gathered water into a U-shaped tube and gathered the kinetic energy and then turned it into a power source, most likely electricity?

  7. Why not forget about the balls! You could simply replace the action of the ball sinking through the fluid and displacing it, with a cam on the axle and a couple of pistons! And, of course, it still wouldn’t work.

    • Then why listen to your suggestion when mine works already?
      Are you people actually drinking gasoline or what??
      What the flying fuck, do you think moves water through hydroelectric dynamos? Chicken shit? Do you still not understand inertial potential is based on us moving through space?Why do you think that you are stationary? Electrostatic functions are stationary, hence the term static, but I know very few people that drink Gasoline understand English enough to use it coherently. Perhaps you could put a weight on a bike tire and spin it on a lever and let it bash you in the face a few dozen times so you can feel this inertial potential for yourself.
      This place is little better than facebook. Is there any scientific forums where smart people hang out or is this it here for the internet?
      https://uploads.disquscdn.com/images/7217f15b18c4cd27b874a2c27a19921f783f598d8a1d0b5722f65f92331cdeb3.png

  8. i just want to know how efficient the swingarms and a wheel mechanism with variable torque is?? because I’m working on it …please help me out..

    • Aslam o alaikum brother if you want a free energy genrator i have plan a gravity engine which is working on the principle of energy conservation

    • email me at [email protected] I have usable answers, solutions and applications for every level of inquiry, from beginner to electro-astro-gravitational techniques. Basically we can tap any higher or lower dimensional oscillatory function through refraction of its magnetic torsion tensor. I spend time talking to PhD’s so we can discuss any level, in nearly any area of expertise. Feel free to email me or call at 250-642-7033

  9. @Geert Van Oosterwyck If citizens would be willing to release digestive gasses into a pet bottle and promptly enclose it by tightening the cap.  We can use these gases to power cars, electric appliances, and if enough bottles are collected the possibilities are without end.  In fact the slogan could be, “Energy from one end, to no end…”

    • Damn!, that’s so f*cking funny, hahahaha. It’s been a long time since I’ve laughed so hard reading a comment. Thanks!

      • I am laughing at you, not with you ..jastthinking.

        The Wang permanent magnet motor, the Ecklin-Brown motor-generator, Howard Johnson’s magnet motor, the ‘Carousel’ magnet motor, Robert Tracy’s magnet motor, Ben Teal’s electromagnetic motor, the Jines magnet motor, Stephen Kundel’s magnet motor, Charles Flynn’s magnet motor, the Steorn magnetic devices, George Soukup’s magnet motor, Dietmar Hohl’s magnet motor, simple permanent magnet motors, the Muammer Yildiz magnet motor patent, Don Kelly’s magnet motor patent, Mike Brady’s ‘Perendev’ Magnet Motor, magnetic shielding from Pasi Mäkilä, the twin rotor suggestion, the permanent magnet motor of Victor Diduck and the permanent magnet Miller/Colson motor. size 1.2 Mb, 31 Oct 2015 HTML ePub

        Chapter 2 Moving Pulsed Systems: The Adams motor/generator, Tewari Paramahamsa’s ‘Reduced Reaction’ Generator, Lidmotor’s Low-voltage Rotor, the Phemax self-powered motor/generator, Raymond Kromrey’s No-drag Generator, Teruo Kawai’s COP=3.18 motor, James Hardy’s self-powered water-jet generator, the Mourier COP=10,000 motor/generator, the RotoVerter, power boosting through coil short circuiting, Raoul Hatem’s free-energy rotor system, Lawrence Tseung’s COP=3.3 Pulsed-Flywheel, Art Porter’s magnetic motor system, raising the efficiency of DC motors and Direct coupled motors. size 4.5 Mb, 29 Sept 2016 HTML ePub

        Chapter 3 Motionless Pulsed Systems: Charles Flynn’s magnetic power enhancement system, Lawrence Tseung’s magnetic frame, The transformers of Thane Heins, Professor Markov’s transformers, A Lenz-Law-Free transformer, David Klingelhofer’s screened transformer, Clemente Figuera’s Motionless Generator, the Alexkor zero back EMF coils, the self-powered generators of Barbosa and Leal, the first Barbosa and Leal replication, free energy from Lorrie Machett, the Annis/Eberly Motionless Generator, the motionless generators of Heinrich Kunel, Valeri Ivanov’s motionless generator, the motionless generators of Kelichiro Asaoka, Stephan Leben’s self-powered electrical generator, Floyd Sweet’s VTA, the Pavel Imris optical amplifier, the Meyer-Mace Isotopic Generator, the Colman/Seddon-Gilliespie generator, Don Smith’s “Resonance Energy Methods”, the Chinese developer Ming Cao, A Russian developer’s self-powered system, ‘Salty Citrus’ Chinese developer, another Russian developer, Nikanor Giannopoulos’ dual Tesla Coil arrangement, making a solid state Tesla Coil, the screened transformer of Joseph Boyd, the ‘Gegene’ magnetic plate power amplification, Tariel Kapanadze’s self-powered generators, the cold electricity coil of ‘UFOpolitics’, Stan Meyer’s electrical Particle Generator, the E-stress power generation system and the Ramaswami power transformer. size 5 Mb, 31 Mar 2016 HTML ePub

        Chapter 4 Gravitational Pulsed Systems: Lawrence Tseung’s pulsed wheel, Lawrence Tseung’s Impact gravity wheel, Chas Campbell’s pulsed flywheel, The Self-powered Generator of José Luis García del Castillo, the Wilson self-powered DC generator, John Bedini’s pulsed flywheel, James Hardy’s water-jet generator, the Donnie Watts self-powered generator, the Magnetic Pendulum, Jerzy Zbikowski’s Chain Drive, Gravitational Effects, Mikhail Dmitriev’s gravity wheel, the Dale Simpson gravity wheel suggestion, the Veljko Milkovic pendulum/lever system, Amr Al-Hossary’s gravity wheel, the Murilo Luciano gravity chain, The ‘Hidro’ buoyancy generator, the Renato Ribera buoyancy patent, the 30-kilowatt gravity motor, the Baskara gravity wheel and the torque generator of William F. Skinner. size 1.4 Mb, 9 July 2016 HTML ePub

        Chapter 5 Energy-Tapping Pulsed Systems: Frank Prentice’s electrical power accumulator, Dave Lawton’s cold electricity water-splitter cell, John Bedini’s pulsed battery charger, the Tesla Switch, the 3-battery switch, Carlos Benitez’s self-powered 2 kW generator, Bozidar Lisac’s Power-Boosting System, Don Smith’s devices, Tariel Kapanadze’s generators, Walter Ford’s high-power crystal set, Lawrence Tseung’s toroids, advanced Joule Thief circuits, The Joule Thief lights of ‘LaserSaber’, the Ed Gray power tube, Radiant Energy waves, Nikola Tesla’s experiments, the Alberto Molina-Martinez generator, Alfred Hubbard’s device, Joseph Cater’s Hubbard design, Floyd Sweet’s VTA, Rosemary Ainslie’s COP=17 heater design, Joseph H. Cater’s insights and Dr Oleg Gritskevitch’s 1.5 MW generator. size 1.8 Mb, 1 Sep 2015 HTML ePub

        Chapter 6 Battery-Charging Pulsed Systems: John Bedini’s pulsed system, Roger Andrews’ switching system, Ronald Knight’s battery information, Ron Pugh’s battery charger build, Ossie Callanan’s free-energy system, a self-charging battery pulser, the modified fan battery charger, the relay coil pulse charger, the self-charging motor, the Alexkor battery chargers, Howerd Halay’s battery conditioning technique, the Tesla Switch, the self-charging motor, the ‘UFOpolitics’ motor, the 3-kilowatt Earth Battery, a battery charger for just one battery and Rene’s variation on the Joule Thief. size 1.4 Mb, 24 Jun 2016 HTML ePub

        Chapter 7 Aerial Systems and Electrostatic Generators: Nikola Tesla’s aerial system, Jes Ascanius’ version of Nikola Tesla’s aerial system, Thomas Henry Moray’s aerial, Hermann Plauson’s systems, Roy Meyer’s device, Raymond Phillips’ RF to DC aerial system, the ‘Alexkor’ aerial system, Dragan Kljajic’s printed circuit, the TREC aerial , Harold Deyo’s patent application, the harmonic energy exchange device, Charles Goldie’s Electrostatic Generator, D. Le May’s Electrostatic Generator and Onezime Breaux’s Electrostatic Generator. size 1.4 Mb, 18 Jun 2014 HTML ePub

        Chapter 8 Fuel-less Engines: The energy in air, Bob Teal’s compressed air engine, Scott Robertson’s thoughts on putting low-pressure air into a tank of high-pressure air, the Leroy Rogers compressed-air vehicle engine adaption, the Vortex Tube, the Eber Van Valkinberg compressed fluids engine, the Clem engine, the Josef Papp engine, the Robert Britt engine, the Michael Eskeli turbines, the James Hardy water-jet generator and the Cahill / Scott heat pump system. size 668 Kb, 25 May 2013 HTML ePub

        Chapter 9 Passive Systems: Hans Coler’s devices, Thomas Trawoeger’s pyramid, the discoveries of Antoine Bovis, James Brock’s experiments, Peter Grandic’s patent, Les Brown’s pyramid information, Joseph Cater’s explanation of how all pyramids work, Pier Ighina’s passive energy devices, the Joe Cell, Bill Williams’ design and recent analytical advances, the Italian B.A.C. coil, co-ax cable electrets and the devices of Mr Keshe. size 962 Kb 14 July 2016 HTML ePub

        Chapter 10 Vehicle Systems: The HydroStar and HydroGen designs, running an engine on water alone, HHO Boosters, electrolyser design, the Smack’s Booster, the Hotsabi Booster, the Zach West electrolyser, the ‘Hogg’ electrolyser from Selwyn Harris, the AVA Magnetic Levitation electrolyser, Bob Boyce’s high-efficiency electrolyser, Pulsed Water Splitters, Dave Lawton’s replication of Stan Meyer’s Water Fuel Cell water-splitter, Stan Meyer’s style of construction, Dave Lawton’s circuits and construction details, pipe-tuning details, Dave Lawton’s auto-tune circuit, Dr Scott Cramton’s low-power water-splitting, modifying generators to run on HHO alone, David Quirey’s system for running unmodified generators on HHO, Stan Meyer’s water injection system, Peter Lindemann’s lawnmower running on water alone, Peter Lowrie’s high-current HHO system, mpg improvement through cam timing, the Firestorm spark plug from Robert Krupa, plasma ignition, Ted Ewert’s Vortex air-feed system, Water Vapour Injection systems, the Ram Implosion Wing, Fuelsavers streamlining, high mpg carburettors, Allen Caggiano’s carburettor, Vortex fuel reformers, the weird nature of water, Advanced Electrolysis, the Charles Garrett electrolyser, the Archie Blue electrolyser and the Petro Dollar. size 3.5 Mb, 27 Jan 2016 HTML ePub

        Chapter 11 Other Devices and Theories: Nikola Tesla’s power from ionised air system, Dr. Harold Apsden’s Electrical Power Generating Apparatus patent, Our Energy Future, Paulo and Alexandra Correa’s conversion of Longitudinal Electromagnetic Waves to ordinary electricity, Prof. Constantin Meyl’s scalar wave information, Nikola Tesla’s MHD drive, the nature of gravity by Maurice Cotterell, construction details for Dave Lawton’s gravity wave detector, the Butch Lafonte motor/generator, the Joseph Newman motor, Daniel Cook’s motionless generator, Michael Eskeli’s work-free heater design, Cold fusion, Karl Schapeller’s Device, Condensation-induced water hammer, William Hyde’s COP=10 electrostatic power generator, the suppression of knowledge, Bob Beck’s medical pulser and Joseph Cater

  10. @Malkana  hi malkana..im from qatar…we are researching into renewable sources of energy ,infact i designed a gravtational motor for a car,but it lacks a few desin integration.i would like to be in touch with you and if we cud speak ,i have a financed research dept. from a sheikh…pls email me back on [email protected] me skype on  cool7275..thx Ali.

  11. any unit larger than 100 KG would stall on the flip .. your science is lacking the 3rd axis of travel and the variable forces that make gravity . harvest the radiation that comes from the core of the earth .. think ark of the covenant … it is truly a wild card device .

  12. Get $14000. Read Gravity books quickly. Research unlimited dark energy. Secure an Alien Network, then bounce over to Serbia in a Sterling hybrid water car, and build a Pinwheel.

  13. @Malana,can you send me more details on basic working principle of the gravity powered engine you use.
    My email address is [email protected]

    Thanks a lot,
    I have putted my research into more proper format:
    Here are the new related webpages:

    http://flic.kr/p/bycsbo

    http://www.besslerwheel.com/forum/viewtopic.php?t=5266

    http://www.besslerwheel.com/forum/viewtopic.php?t=5268

    http://www.besslerwheel.com/forum/viewtopic.php?t=5272

    http://www.besslerwheel.com/forum/weblog.php?w=7 (Presently three blog articles in one blog)

    Real Gravity engines or gravity wheels(most famous type of Gravity engine) works on the principle that,

    “95 percent working Gravity engines work on the principle that the Gravity engine/Gravity wheel systems are innovatively designed to take in (consume) much more Gravitational energy than what energy needed to lift heavy ball upward.”

    The most problematic thing with many people is they do not think how more amount of gravity can be inputted to gravity powered engine ,than that needed to take ball up.

    If you substract total amplified Gravitational energy input from the energy needed to lift heavy balls up in a gravity wheel,you get some net gravitational energy which is the net energy input to the system(input after subtraction) which can be converted to electrical energy.This is the scientific basis for any real Gravity engine.And hence real Gravity engines do not violate Laws of energy conservation and hence Gravity engines are Not Perpetual.
    Mystery solved.More details are available on the above mentioned webpages links.
    For me Gravity engines was never a mystery.

  14. This is what i needed to kick start an idea i had thank you i will let u guys know if it works and the how i built it.

  15. Hi Its not simple but in fact it work as i am using g-engine with my 55kv alternator to produce enough power for my use since 1986. I did not tried to market it as i knew i cant face the oil mafia but its running with me for long time i am taking 16000rpm at out put and then to control i am using reduction gear . i can not take chances but if any one of you out there have guts pls cont me so that we may do some thing. I am using on mountain to pump up water and general house and farming use of power i do have governt provided but mainly i am using my own power. I am using chines alternator . If we build it fix type and the couple it with big alternator to gain powr in mega is not at all problem but what to do world is being dominated by mafia and my country is already being rule by mafia????????? Now I am old enough i can take chances. Thanks

  16. Thanks,Oren,I am still continuing my research work,we want to make a perfect Gravity engine,more compact and more efficient.The research will not stop.

  17. The right way to get things done is not to mind who has got the credit for doing them.
    Don’t just retire from something; have something to retire to.

  18. I am 75 percent sure,that this gravity powered generator works on the principle I used!
    I am Aman. Perpetual motion machines are impossible. I am inventing an engine that runs on gravity for small domestic use and also optimising it for next world future cars. But my engine is not a perpetual motion machine!
    This is “gravity-piston impulse kinetic power technology.” It’s like releasing a heavy ball over a small, lightweight ball at some distance from the earth’s surface in a vacuum. This means, without any considerable reduction of speed of the bigger ball travelling towards the ground, the smaller balls get extra energy due to gravitational amplification. Well, my engine works on a similar principle. In other words, it works on the principle of gravitational amplification.
    What happens is very similar to this equation: “Impulsive gravitational energy absorbed and used by lightweight small ball from the heavy ball due to gravitational amplification plus standard gravity (9.8); as output electricity (converted) equals small loss of big ball due to impulse resistance/back reactance plus energy equivalent to go against standard gravity plus fictional energy loss plus impulsive energy applied.” I can’t disclose the whole concept to general public because we want to apply for a patent. There are a few diagrams relating to my idea, but I fear someone would copy them. Please wait until I get patent so that I can disclose my engine’s whole concept.
    At first, I intended to produce products only for domestic use and as a camping accessory. I am doing more research for increasing power output so that it can be used in the future in cars. My engine uses heavy weight piston gears, and four flywheels in an unconventional and different way and pusher rods, but not balls. It was necessary for me to use the example of balls to explain the basic idea I used in my concept. (The ball system is analogous to the piston-gear system I am using in my engine).
    I want to release one more secret of why might non Perpectual magnetic engines get power from magnets,continuously,
    Magnetic engines? Yes, possible but they are not perpetual.
    Photons (light) hit the atomic particles continuously to compress particles inside atoms and thus store energy in them similar to a compression spring in the form of nuclear energy!So you can extract that energy to get required electrical power!
    So non-perpetual magnetic engines are possible, but some people can cheat by claiming to invent perpetual machines.
    Well,I mean to say,”Analogous “,which means similar.Both his and mine may use similar basic principle /idea but the working mechanism may be totally different!

  19. I have a question.

    could you not use the generator (the thing that actually harnesses the energy and turns it into power), hold on, could you not mount the wheel on the generator and thus remove some of the extra friction that would be made when putting the wheel on the stand?

    also how much energy have you calculated a version of this would create? if it would be 50 watts per 3 foot wheel, then its not to great, but if it was to be closer to 1kw per 3 foot wheel, then you could sell a box with 10 wheels in each.

    i would be interested in attempting to make a small version of this (using a wheel roughly 3 foot in diameter) but i would need some more complex designs (im not entirely sure how the base would work, where the water would be, the air pipes ect ect.

    as for it eventually running out of steam, if it was creating enough power, you could have a small motor on a timer to reset it to maximum force again (auto engage and disengage after 30 seconds or whatever, and then sit dormant until the next time it was required)

  20. i have just read this page and i believe it would work but i also believe that it will not rotate fast enough to produce a significant amount of electricity. it is a very good idea but will not fulfil the future’s energy needs.

  21. Hi..
    I might be missing something here. Please explain to me :
    1. By looking at the machine’s design, I feel it will oscillate rather than rotate (Note that the direction of the push bar is inverted)
    2. The concept of this machine running on gravity – Wont damping occur (Any amount of lubrication will not completely remove it) In a EM generator, magnetic force is much greater than the gravitational and inertial force. Here the driving force itself is gravity, unless the is complete absence of damping (impractical), how can it run the machine??

    Leme know if you have an explanation.

  22. [email protected]

    DEAR SIR:

    MY NAME IS TONY AND I AM A STOCK BROKER FROM THE U.S.A. MY MISSION IS TO FIND INVESTMENT OPPORTUNITIES FOR MY THOUSANDS OF INVESTORS LOOKING TO INVEST IN ANY AREA IN THE WORLD THAT PRODUCES ELECTRICITY FROM SOURCES OTHER THAN OILS.
    RIGHT NOW I AM TRAVELLING FOR THE NEXT FOUR WEEKS. IF YOU HAVE AN INTEREST IN SHOWING YOUR “WORKING MODEL” AND PROVING TO OUR TECHNICAL ENGINEERS THAT YOUR ITEM OR SOMEONE ELSES DOES WHAT IS CLAIMED, THEN PLEASE CONTACT ME BY E-MAIL.
    IF I DO NOT HEAR FROM YOU WITHIN THE NEXT FOUR WEEKS, THEN I WILL ASSUME YOUR ITEM OR ITEMS ARE NOT READY FOR INVESTORS AND MY ENGINEERS TO ACCEPT AS VALID.

    NOTE: HAVE INVESTORS WAITING TO INVEST AND HAVE CUSTOMERS WAITING TO PURCHASE. A “WIN” “WIN” SITUATION.

    THANK YOU FOR YOUR TIME AND EFFORTS.

    SINCERELY,

    TONY DELETIY

    [email protected]

  23. i’m busy to build my own system, on my own way how i think that we can build a working energyengine. But the first thing that i know is, that we must leave the idea of a wheel, a wheel is NOT working, never, try to build a working wheel are we still doing for centurys. If there was ONE who should work, we should use it for a lot of time.
    So, MY idea is: untill now, there is NO working device, otherwise, the world should know it, beceause a working free energyengine put the people off the whole world in the begin of a complete new time.
    I think that we gonna search it a lot to far of all, i think that we should just use simple mechanical laws to build a working machine. I have my own idea how i have to build it, but now…. the BIG question, suppose it works, what should i do with this engine???
    I can not take a patent, beceause “they” give NO patent for a “perpetuum mobile”beceause, “they” say that it is impossible. A couple hundred years ago “they” say that the earth was flat. “they” said that the earth was the middle of space. Galilei was in jail, bcz he said that the sun was the middle of our planetsystem, and NOT the earth. So, dont believe allways what “they” say. 120 years ago, “they” said that jules verne was a fantast, beceause we should travel to the moon.
    Changes in the history of mankind exist, just beceause there are people who not believe everything what “they” say. And these people try to find other ways ,and i know, we have a LOT of “fakers” , but, there are alose people who stay objective. I have my own idea how i have to build a working system, i”m busy to build a prototype now, just for the price of 100 euro. But i will just test my way of thinking, i will know off it works. Even my wife dont believe me ,just beceause “they” say that it is impossible. But i think that i have to try it, its just 100 euro, for this price, maybe i can change the world 🙂 The most important piece on my “engine” are… PETbottles, so i call my “project” :”the build of the pet bottle engine”. When it work, i let you know 😉

  24. Theuns,
    I’m not sure you are understanding the operation of this machine.
    When the weight ball is at the bottom of the lower cylinder it has not loaded the top cylinder with more weight that itself. What moves the rotation is both the combined weight of the right side cylinder’s fluid, and the energy push received by the bottom push bar. These equal two times the energy for the rotation that the bottom ball represents to counter the rotation.
    With the left side ball having been pushed to the axis, and when the rotation begins the top weight contributing to the rotation, successful operation is achieved.
    Don’t forget to see the fluid weight in the right side cylinder.
    Thank you,
    Russell Lee

  25. Hello,
    A design feature that has not been mentioned is that within the ball saddle is a spring mechanism (inverted automobile leaf spring would work) that is depressed when that cylinder is at the bottom position. As that cylinder rotates to the left after being emptied, the leaf spring (having a push bar) pushes the weight ball away from the saddle and toward the axis where magnetic attraction can hold the ball in place. This action removes the only weight resistance to the 90 degree rotation, insuring the generator’s operation.
    Thank you, Russell Lee

  26. i think the free energy in a combination of electromagnetism,gravity and solar electricity will provide for a perpetual energy mechanism,it will be a great idea to work on using all the three free resourses

  27. I have calculated the required mass of the “Balls” for an assumed water level difference of 1m between the bottom and top water connecting pipe ends. With 1 metre height the pressure of the water at the bottom exit is calculated as density(water)*g(gravity constant)*1metre = 1000kg/m3*9.81*1= 9810pascal. Asumme now that the piston cross-sectional area is 1square metre, and the volume of water is 0.4cubic metre. The ball weight to push the piston down (with piston weight included) must be 1000kg to generate the 9810pascal. This ball will end up at the bottom of the piston (or close to it) and will thus balance any water that was raised to the top, ie it will not be top-heavy, at best with a perfect design it will stay balanced – with the current design with space open between the piston and the bal the assembly will be bottom-heavy after the ball has decended and be stable. Those who believe it will work, build it to prove it?

  28. I’m sorry but I think it is you that has missed the point of our discussion. Your statement that essentially all science is ridiculous is both ignorant and insulting. You wouldn’t be sitting there typing on a computer, communicating over the internet, in your nice heated/air conditioned home without science. Take a step back and take a bit more of your own advice before making such bold, unsubstantiated claims.

  29. All this discussion is interesting but much of it is missing the point. This pinwheel generator represents the discovery that the laws of thermodynamics are circumventable. Compound mechanisms that, during their function, cease to exist and become something else are not held under these laws. This generator first is an energy generator with the weight ball descending down the bottom cylinder, then when the ball arrives at the bottom, the generator ceases to exist and the whole machine becomes an over-weighted wheel. Once the rotation is accomplished, this mechanism ceased to exist and the generation stage comes into existence.
    This is a perpetual mechanism, it’s just not built to be an eternity machine that can run forever due to the friction present. The mistake all common mortals make is that if a machine is demonstrating a perpetual motion effect, it must also, to be a perpetual motion machine, able to run forever. A perpetual motion machine does not have to be an eternity machine. Perpetual motion is how it runs, not how long it runs.
    Maybe some should re-read the explanation on the squidoo site one more time. With the addition of a past design improvement it cannot be argued that this machine will not work. The spring addition (potentially an automotive leaf spring) into the cradle holding the weight ball, when the rotation takes the bottom cylinder to the left side, the spring will cause the ball to travel toward the axis where it can be held in place by simple magnetic attraction to the axis cradle. This will eliminate most of the counter-weight opposing the rotation.
    Much of past science was ridiculous. Today’s science has come from the past. Tomorrow’s truths always find resistance in today’s/yesterday’s adherents. We cannot know any future truths if we view everything only through today’s lens. The message is simple: Think for yourself.

  30. Thank you for your feedback on that. I appreciate your input there.

    As for Tesla, many of his inventions were not suppressed, but are in use
    today, such as alternating current, wireless transmission, and others.

    Many more of his inventions have patents but seem to be neglected.
    Maybe for good reason, I don’t know. Based on the obvious genius of
    the man, he appears to me to have been way ahead of his contemporaries,
    and might be even today if he was still alive.

    Here is an interesting site which outlines Tesla’s work, but perhaps
    unfinished would be a better word to describe some of it, rather than
    suppressed.

    fuel-efficient-vehicles.org/tesla-flying-machine/Tesla-lost-inventions.php

    I do think that Big Oil interests actively suppress any technology that
    threatens their monopoly. If people had access to free energy, the oil
    companies would lose their economic control over everything energy
    related.

    I agree that an economy based on free energy would be much more prosperous
    for the world, but it is also about control, not just money. Power is the
    ultimate aphrodisiac, as they say.

    Anyway, not trying to argue. Thanks for an interesting discussion.

  31. “… but it seems that people like Tesla, who was clearly a genius, was able to use these principles for some amazing inventions, which were later suppressed by private interests. If you had a working prototype, do you really think those interests would allow you to build millions of them?”

    Firstly which ‘priciples’ are you referring to? And how do you know he had some amazing inventions that where suppressed? It makes zero sense that someone would suppress such a prototype – there would be SO much more money to make in free energy than all the hassle we go to dig up oil and coal.

    In short, the exert is conspiracy hogwash. It has the illusion of sounding plausible because it is interjected with some real history. For a start, Maxwell’s unedited “Treatise on Electricity and Magnetism” is available online, it was not thrown away and forgotten about. Hertz did play around with Maxwell’s equations attempting to add the effect of an ether – the existence of which was later disproved by the famous Michaelson and Morley experiment.

    It is true that Heaviside reformed the quaternion equations in terms of tensor fields, because they seemed more fundamental. What is left out here is that 100 years later physics RETURNED to these potentials as the fundamental object in Quantum Electrodynamics. These days QED is simply derived through the gauge principle – which is explicitly manifest only when you are working with the potentials.

    I can assure you there are not “22 errors” in the theory and they surely havent closed doors. Adding gravitation to electromagnetism was an interesting development of theory, done in the early 1900’s, but it ultimately ended up being wrong. The good thing about science is that dead ends are not taken too literally and the approach of adding extra dimensions to space to explain the forces of nature lives on – it is currently a thriving area of theoretical physics and an essential addition to string theory.

    I could go on about more problems with the excerpt, but its not really worth it, let me know if there is anything more in particular you want addressed.

  32. I know that many (99.99%) devices do not work, but it seems that people like Tesla, who was clearly a genius, was able to use these principles for some amazing inventions, which were later suppressed by private interests. If you had a working prototype, do you really think those interests would allow you to build millions of them? You would be quickly bankrupted and discredited, or possibly worse. Such is the fate of people, like Dr. Rife, who cured cancer in the 1920s. Perhaps the politics that I refer to is what prevents these breakthroughs from reaching people like you to begin with. It is an external control system, not the scientist themselves. I don’t mean to label you one way or the other. I know that any community can be very diverse.

    I would be interested to get your reaction to the following excerpt. I’m not sure of the original source, but I have heard this more than once. There seems to be a divergence following Maxwell between what is taught in classical physics and what is available to covert interests. Maybe it is all nonsense and conspiracy theory. I don’t really know, but my sense is, there is some truth to it.

    “In late 1864, James Clerk Maxwell published his epic material on
    electromagnetic waves. His material dealt not only with electrical
    and magnetic waves, but also the relativistic/ etherial psycho-active
    component of these waves (representing electromagnetics of the second
    order and above). The equations also included transformations that
    enabled the change from inertial frames of reference to non-inertial
    frames of reference. Maxwell’s original equations were written in
    Quaternion notation, a complex mathematical system available at that
    time before Vector Analysis was introduced by Oliver Heaviside.
    Today’s generalized equivalent of Quaternions is Tensors.

    In short, Maxwell’s original work gave the necessary information for
    gravitational propulsion and psychoactive devices. Someone somewhere
    recognized this, for shortly after his death, the mathematician
    Oliver Heaviside, the chemist Willard Gibbs, and physicist Heinrich
    Hertz decided to “edit” or “interpret” Maxwells famous equations
    which were, in the original form, the foundations of electromagnetics
    and Unified Field Theory (UFT). This “unholy trio, especially
    Heaviside, disregarded the Quaternions or Scalar components of
    Maxwells original equations, because they represented potentials and
    not fields. He thought potentials were akin to “mysticism”,
    because “everybody knows that fields contain mass, and mass cannot be
    created from apparently nothing, which is what potentials are, both
    literally and mathematically; they are an accumulation or reservoir
    of energy. Furthermore, not only did they throw away the
    gravitational component with the Quatern- ion/Scalar, but also
    postulated that gravitation and electro- magnetism were mutually
    exclusive, not interdependent. That was the death blow to subsequent
    efforts by scientists to realize a functioning unified field theory.
    Because of this one act, electromagnetism was reduced from its
    original five dimensions to only four: X, Y, Z, and time. The element
    of G was removed.

    Because of this deliberate act, twenty-two other errors exist today
    in electromagnetic theory. The very concepts of force, mass and
    charge are ill-defined, and the so-called “static” electrical charge
    has been discovered by Quantum mechanics not to be static at all, but
    to move rotationally by virtue of the quantum mechanical spin.
    Finally, adding insult to injury, the so-called “imaginary
    components” of Maxwells original equations as well as the mutilated
    version of the equations have also been discarded or ignored. With
    this last error, the door to hyperspacial domains was forever closed,
    for the present mathematics and physics of electromagnetic theory do
    not allow for hyperspacial domains (domains out- side of three
    dimensions), superluminal signals (signals that exceed the speed of
    light or are infinite in speed), and a unified field theory.

    The edited version of Maxwells work, which every physicist and
    engineer has had to contend with, discards electrogravitation, and
    avoids the unification of gravitation and electromagnetics. It also
    prevents the direct engineering of gravitation, space-time, time flow
    rates, free energy devices, and quantum changes, which is viewed by
    the altered equations that are vector-based as only a statistical
    change. The quaternion approach captures the ability to utilize
    electromagnetics and produce local curvature of spacetime. Heaviside
    wrote a subset of Maxwell’s equations where this capability is
    excluded.

    Dr. Henry Monteith has independently discovered that Maxwell’s
    original quaternion theory was a unified field theory. Einstein
    assumed, because he only had access to the altered equations, that
    curving spacetime could only be achieved by the weak gravitational
    force due to mass, that the local frame would always be a Lorentz
    frame, which would mean that all operations would be constrained to
    conservation laws of physics.” In the 1960’s the Hertz (Hz) replaced
    Cycles Per Second. Since, then everyone thinks that all
    electromagnetic waves are hertzian. Only the upper portion of the
    spectrum before Infra- red contains Hertzian waves. ELF and ULF are
    not; waves in biosystems and natural phenomena are not Hertzian in
    nature.”

  33. No problem. For one, if a device extracts energy from a known source then I wouldn’t call it an overunity device. You say we should examine why they work, but thats just it – they don’t work. Attempts to make devices such as this are not new, only more extravagant; the earliest designs date back to the 8th century! (http://en.wikipedia.org/wiki/History_of_perpetual_motion_machines).

    But trust me, if someone produced a working prototype I would happily investigate it, find out how it works and build millions on them – this is just a very unlikely scenario. Also take it from someone on the inside, science is not governed by politics (at least where I’m from) we have a lot of freedom to explore the universe and our minds. Much to our frustration we are often labelled as closed-minded in these kinds of discussion, which really de-motivates us from taking part at all.

  34. Sorry for my sarcasm. I was simply suggesting that no laws of physics
    are being broken by so called over unity devices. A dam could be thought
    of as over unity if we did not see the water or know where it came
    from and it might appear to violate physical laws. Magnetism, gravity,
    the zero point field, or whatever else might exist, can be tapped into as
    well.
    I’m sure there are more hoaxes than not, but it is hard to ignore the
    evidence of people like Tesla or Adams. Sometimes it just seems like
    the sciences are governed more by politics than a true desire for
    exploration and discovery.
    We should be examining why these alternate technologies work, not
    why they don’t. Just my humble opinion. 🙂

  35. …Because water does exist and gravitational potential energy is a well understood concept. The energy in the case of a dam is free as you say but by no means created from nothing. The sun provided the energy to evaporate the water (which then falls as rain) that we extract hydroelectricity from. There’s no magic going on here, the universe is a scrupulous accountant, if it weren’t devices such as those above would be solving the worlds problems by now.

  36. Ooh, ooh, I hear there is this new over unity device, called a hydroelectric dam. Where does the energy come from? Some say it is from the water in rivers storing up potential energy at the Dam wall, but I think that is just wishful thinking. How can you get free energy from a Dam? It defies the laws of physics. Won’t the friction in the Dam generators cause it not to work? I’ve never seen this so called “water”, therefore, it must not exist. How can a Dam tap into something that I say does not exist?
    Maybe I should get a PhD in physics too.

  37. Oh dear. Hear I was thinking I had found a good new site to visit..

    There is no such thing as a free lunch. You cant create energy from nothing – period. The world would not operate if this fundamental law (the conservation of energy) of physics was not upheld. I am not being closed minded about this, I am currently doing a PhD in physics.

    This device could run, as Mark said, perpetually if there was no internal friction. Even then, if there was no friction once you take energy out to power a generator, you slow the wheel down and it will stop.

  38. i think that can produce electricity by combination gravity and hydrolic for example inter the tube of a truck if you want to know mail to me.

  39. What if you used a wind-power assist to provide just the tiniest bit of guarantee to the “perpetual motion,” thus allowing an outside small power source to keep this going? The wind power could get this going (if you have wind, which we have plenty of here in Texas) and keep it going through any slow-down of the friction-induced conditions. You might also consider a small assist from water flow, or even solar power, without tapping into the grid.

  40. It seems now the Godproven.com website isn’t going to come up any time soon so it will found presently at the Archive.org site (search Godproven.com in the way back machine bow).
    Regards,
    Russell Lee

  41. Try this…I want someone to attached some tubes at angles (one end closer to the rim) all around the spoke area of a large bicycle wheel or a wheel with better bearings. Inside the tubes go solid steel or glass balls one in each. One end of the steel of hard plastic tube is sealed shut the other blocked with a small spring.

    The tubes are also internally lubricated. As the wheel turns the steel balls slide along the angled tubes to be closer to the wheels axil for half the rotation. as they pass at the top or the rotation, gravity pulls on them and they slide down the tube in the direction of the wheel rim untill they hit the solid tube end with a hard thud. The rool back before the ride back to the top is absorbed by the spring dampening and countering some momentum loss.

    Because the balls are closer to the rim on the down side and closer to the wheel centre during the ride back to the top, the wheel is always heaver on one side.

    This may not be enough to keep it turning due to the friction, so the momentum boost provided by the steel balls hitting the solid tube ends is like a small hammer that strengthens the momentum to keep the wheel turning, provided a human oils it once a week. I don’t have a workshop to build one.
    comments to Founder at savetheworldfree.ning.com

  42. This design has been gaining a following and will no doubt show itself in an actual working machine in the near future. Because it has been given to all for free, every nation seeking energy self-sufficiency can take advantage of this free energy generator. Mark needs to study this design before deciding it won’t work. Believing automatically what the corporately controlled education system teaches is a great way to remain a stepford person. Godproven.com is to come up within a few days (3/14-16+-) so all can view ALL of the information on it and not have to take to smear attackers opinions on it.
    Thank you, Russell Lee
    Power to the People

  43. There is a drawing of this machine posted at http://www.overunity.com Look in the forum under gravity powered devices, pinwheel generator. It is on the 2nd page of this thread. It will give an idea of what this machine would look like if it were built. As far as I know, no one has built this machine yet.

  44. Just like in freshman physics, as long as you ignore friction, it works.
    The US patent office banned patent applications for “perpetual motion” machines more than a hundred years ago for a reason-they can’t work.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.