Fraunhofer Develops New, Easy to Make High Efficiency Solar Cells

Yet another efficiency record has been established for mass-producible solar cells: 23.4%. The Fraunhofer Institute for Solar Energy Systems (ISE) from Germany succeeded to manufacture a single-crystal silicon solar cell of a thin p-type semiconductor layer residing on an n-type semiconductor substrate. The solar cell’s area is 2x2cm.

Until now, classic crystalline solar cells have been manufactured on p-type semiconductor substrates, with a thin n-type layer deposited on it. Reversing the order has been difficult because they needed a good sealant, since SiO₂and SiNx do not work well on p-type semiconductors. By using aluminum oxide (Al₂O₃) as a sealing material on the side that receives sunlight, it is now possible to manufacture relatively easy solar cells with n-type semiconductor as a substrate.

Added to the simplicity of manufacturing, n-type substrate solar cells have the big advantage that they are not as sensitive to impurities as are their p-type substrate sisters, and that means not only higher theoretical efficiency, but also a practical one.

The absolute solar efficiency obtained until now is 25%, achieved by a group led by prof. Martin Green from UNSW in Australia. Still, his solar cell “recipe” is not feasible, because it is difficult to be mass-produced. However, Fraunhofer’s cells may have a chance to get on the market soon enough.

You may also like to read about:

New Manufacturing Technology Promises to Improve CIGS Solar Cells’ Efficiency

Nanowires May Boost Solar Panels Efficiency and Lower Prices

Exfoliation used to produce cheaper and lighter solar cells

Organic Photovoltaic Solar Cells: A New Graphene-Based, Flexible Kind of Cell

Amazing 35% Efficiency of Multi-Band Thin Film Solar Cells Demonstrated

Close Competition for Most Efficient Concentrator Solar Cells from U.S.-Based Spire Corporation

By Ovidiu
on September 29th, 2009

Get E-mail Updates

Subscribe by RSS

aluminum oxide, australia, Copper indium gallium selenide, Energy conversion, environment, Fraunhofer Institute For Solar Energy Systems, germany, Martin Green, monocrystalline solar cell, Multijunction photovoltaic cell, n-type solar cell, n-type substrate solar cell, photovoltaics, semiconductor, Semiconductor devices, semiconductors, solar cells, solar energy, Technology_Internet

This entry was posted on September 29, 2009, 6:06 pm and is filed under Solar Power. You can follow any responses to this entry through RSS 2.0. You can leave a response, or trackback from your own site.